Treadmill Safety Features
13
4. Start the workout from the beginning, reducing the
time as needed to account for the amount of
exercise that has been completed.
Figure 5: Attaching the safety clip
Entering the Safety Code
The treadmill provides a safety code to help prevent
unauthorized use. By default, this code is not active.
However, if you want the treadmill to operate only for
people who know and can enter the code, you can
activate it when you set up the treadmill (refer to
Setting Up Your Equipment).
To use the treadmill when the safety code is active:
1. Press any key on the console.
2. When the word PASSWORD? appears on the
console, press the following keys one at a time, in
order:
– WORKOUTS
– ENTER
– Left arrow
– Right arrow
To Next Page
Loading...
Need help?
General