Maintenance
49
To determine left and right, stand at the rear of the
treadmill and face the display. Make all belt
adjustments on the right rear corner bolt using the
hex key provided.
– If the belt is off center to the LEFT, turn the
adjusting bolt ¼ turn counterclockwise, which
moves the running belt to the right.
– If the belt tracks off center to the RIGHT, turn
the bolt ¼ turn clockwise; this moves the belt to
the left.
Important: Do not turn the adjusting bolt more than
¼ turn at a time. Overtightening the bolt can damage
the treadmill.
2. Recheck the alignment of the running belt.
Long-Term Storage
When the equipment is not in use for any length of
time, turn it off. Make sure that the power cord is
unplugged from its power source and is positioned so
that it will not become damaged or interfere with
people, furniture, or other equipment.
To Next Page
Loading...
Need help?
General