Section 2 - INTRODUCTION
5
© Copyright 2006 PREO SRL
All rights reserved
EAW530E2MV
Edition
03/2006
2.4 PRODUCT IDENTIFICATION
The applicator bears a CE 89/392 conformity plaque on one side, which must not
be removed for any reason whatsoever, even if the machine is sold.
When requesting assistance or ordering spare parts and optional equipment, always
quote the code and registration number featured on the plaque, as illustrated in
figure 3:
Figure 3
2.5 PRODUCT CODE CONFIGURATION
The following table indicates the code used for the applicators.
Please make sure that you quote the code indicated on the plaque, together with
the registration number, whenever you contact us.
E A W 5 3 0 E 2 H M V
1 2 3 4 5 6 7
1
applicator model
EA
EASY
2
pump type
W
GEAR
3
tank capacity
5
5
KG
4
pump capacity
30
3.00
CC REV
E
TERMO SERIES
5
computer
R
TRATTO SERIES
2
2
CONNECTIONS
6
channels
4
4
CONNECTIONS
M
PRESSURE CONTROL GAUGE
V
QUICK RELEASE VALVE
7
options
H
HIGH TEMPERATURE VERSION
To Next Page
Loading...
Need help?
General