30
Section 5 - MAINTENANCE
© Copyright 2006 PREO SRL
All rights reserved
EAW530E2MV
Edition
03/2006
5.8 MACHINE STORAGE
When the machine is to be out of use for a certain period of time, we recommend:
• Switching the machine off.
• Disconnecting the power supply.
• Cleaning all the visible parts with a jet of air.
• Emptying and cleaning the tank using the method indicated in paragraph
5.5
• Covering the entire machine with a waterproof canvas
• To protect the electrical parts, store the machine at an environment
temperature of between 35°C and 40°C.
5.9 DISPOSAL
If you intend to dispose of the machine, for whatever reason, you need to observe
some fundamental rules in order to safeguard people’s health and the environment.
Sheaths, flexible hoses, plastic and non-metal components should be dismantled
and disposed of separately.
Plumbing and electric components, such as valves, solenoid valves, etc. should be
dismantled and then reused if still in good condition, or reviewed and recycled if
possible.
The machine does not contain pollutant oils.
To Next Page
Loading...
Need help?
General