EasyManua.ls Logo

PRESONUS StudioLive 24 User Manual

PRESONUS StudioLive 24
157 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
StudioLive
Series III
Digital Mix Console / Recorder with Motorized Faders
Owners Manual
www.presonus.com
®
English

Table of Contents

Other manuals for PRESONUS StudioLive 24

Question and Answer IconNeed help?

Do you have a question about the PRESONUS StudioLive 24 and is the answer not in the manual?

PRESONUS StudioLive 24 Specifications

General IconGeneral
Channels24
Frequency Response20Hz-20kHz
Bit Depth24-bit
TypeDigital
Mic Preamps24
EQ4-band Parametric EQ
RecordingUSB
ConnectivityUSB, Ethernet
Inputs - Mic Preamps24
Outputs - MainXLR, 1/4"
Outputs - OtherAux
Effects TypesReverb, Delay, Chorus
Sample Rate96kHz
EffectsReverb, Delay, Chorus, Flanger
Inputs - Line24

Summary

2 Getting Started

2.1 Level Setting Procedure

Step-by-step guide for setting input levels and basic mixer operation.

3 Hookup

4 Basic Mix Functions Overview

5 Buses and Routing

6 The Fat Channel

6.1 Overview

Introduction to the Fat Channel's signal processing and mixing capabilities.

6.2 Fat Channel Navigation

Explains Dynamic and Fixed Fat Channel modes and navigation.

6.3 Input Mode

Accessing controls and displays for input channels via the Fat Channel.

6.8 Fat Channel Screens

Overview of different Fat Channel display screens and their functions.

6.10 Input Controls

Managing input sources, meters, and routing for channels.

6.10.1 Input Source

Selecting the input source (Analog, Network, USB, SD Card) for a channel.

8 SD Recording

8.1 Creating a New Session for Recording

Setting up a new session for multitrack recording to an SD card.

8.2 Loading a Session for Playback

Loading recorded sessions for playback or virtual soundcheck.

8.3 Capture Screen

Overview of the PreSonus Capture multitrack recording application.

8.4 Virtual Sound Check

Using recorded audio for soundcheck without the band present.

9 Master Control

9.1 StudioLive Series III FLEX DSP Rack Effects

Accessing and managing the internal effects processors.

9.6 Scenes and Projects

Storing and recalling mixer settings using Projects and Scenes.

10 Monitoring Controls

10.1 Solo Controls

Managing the solo bus for isolated channel monitoring.

11 Graphic EQ

11.1 Assigning GEQs

Assigning Graphic EQs to mixes for system tuning.

11.2 Using the GEQ

Controls and functions for operating the Graphic EQ.

11.4 Using the RTA to Ring Out Monitors

Using the Real-Time Analyzer to identify and eliminate feedback.

12 Home

12.1.4 Firmware Update

Updating the mixer's firmware.

12.3 Audio Routing and the Digital Patching Screen

Managing audio routing options for various devices and sources.

12.3.1 Digital Patching: Input Source

Patching input sources (Analog, Network, USB, SD) to channels.

13 Resources

13.6 Using Input Delay

Adjusting input delay for phase alignment and timing.

14 Technical Information

Related product manuals