Prestige APS622E - RF Programmable Features (Bank 3)

128-9351
13 of 16
Page 13
RF Programmable Features Bank 3 Is Remote Start Selectable Features: Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps 5 Chirps 6 Chirps 1st Defrost Output Not Available 2nd RF Start Chirp Off On On & Car Finder 3rd Run Time 5 Mins 10 Mins 15 Mins 20 Mins 45 Mins 60 Mins 4th Parking Lights On Steady Flashing 5th Input Check Voltage Tach DBI Tach Hybrid 6th Voltage Level >0.5V B4 Start < 0.5V B4 Start 7th Ign. 2 Select Off During Crank On During Crank Same As Accy. 8th Ign. 3 Select Not Available 9th Diagnostics Off On 10th Crank Time 0.8 Sec 1.0 Sec 1.5 Sec 2.0 Sec 11th Gas/Diesel Gas Diesel 10 Diesel 15 Diesel 20 12th Transponder O/P Not Available 13th Temp Start Not Available 14th Crank Averaging Averaging Preset Time
Note: When averaging, the engine must be started 4 times with the key to be effective.
15th R/S Shock Not Available 16th Turbo Select Not Available 17th Black/Blue (Aux O/P) Single Pulse As Feat 1 Bank 2 18th One or Two Press Start Two Press One Press
NOTE : When feature #5 is set for Voltage or Hybrid, the unit must also have feature #14 set for Preset Time or the unit will ash the Pk. Lts. 7 times and not start. When using the RF programmer, enter the program mode as follows: Turn the ignition on Press and release valet switch 3 times Turn ignition off then on Press and hold valet switch for 5 seconds Siren chirps 2 times indicating access to RF feature program mode.