Do you have a question about the Pride Mobility OUTBACK and is the answer not in the manual?
Brand | Pride Mobility |
---|---|
Model | OUTBACK |
Category | Scooter |
Language | English |
Explains symbols used for warnings and important information on the scooter and manual.
Emphasizes reading all instructions and warnings for safe operation and avoiding product damage.
Outlines user's promise not to alter safety features and delivery checking.
Encourages feedback and provides contact information for Pride Mobility Products.
Covers symbols for pinch points, corrosive chemicals, EMI/RFI, lifting, explosive conditions, and reading the manual.
Details maximum seating weight, freewheel mode on inclines, battery type, and anti-tip wheels.
Advises on weather exposure, electrical safety, battery compatibility, and tyre safety.
Covers indoor use for chargers, disposal/recycling, and lead content warnings.
Mandatory manual reading, no unauthorized modifications, and pre-ride safety checks.
Importance of tyre inflation, weight capacity, and risks of exceeding them.
Guidelines for climbing, descending, and avoiding hazardous inclines, plus accessory weight limits.
Stability on inclines, safe cornering, braking systems, and outdoor surface considerations.
Warnings about stationary obstacles, kerbs, steps, and operating on streets/roadways.
Precautions for weather, freewheel mode safety, and avoiding stairs/escalators.
Advice on lifts, lift products, and mandatory battery handling safety.
Guidelines for motor vehicle transport and safe mounting/dismounting.
Role of positioning belts and consulting physicians about medications/limitations.
Warnings about alcohol influence, smoking guidelines, and EMI/RFI effects.
Further warnings about EMI/RFI from devices and accessories.
Identifies components of the control console assembly, including speed, throttle, and horn.
Explains key switch operation, tiller adjustment, horn, and hazard lights.
Details the battery meter, 8-16 km/h switch, and light switch operation.
Explains throttle/handbrake levers and identifies rear section components.
Covers turn indicators, controller module, and the main circuit breaker.
Explains manual freewheel levers and the function of the motor assembly.
Details battery needs, charging, and reading battery voltage via meters.
Lists safety precautions for charging and addresses common questions.
Step-by-step charging guide, LED indicators, and FAQs about charger function.
Guidelines on charging frequency, battery installation, and maintenance.
Detailed instructions for installing and removing scooter batteries.
Tips for maximum range and recommendations for suitable battery types (AGM/Gel-Cell).
Procedure for breaking in new batteries and ensuring maximum battery life.
Information on requirements for using public transportation with the scooter.
Essential checks before mounting and steps for getting onto the scooter.
How to drive, steer, stop, and reverse, plus the power down timer feature.
Instructions for adjusting tiller angle and seat height.
Details adjustments for seatback recline, lumbar support, and seat sliding.
Guides for adjusting armrest angle, height, and width.
Lists the six components that can be disassembled and notes requirements.
Refers to specific sections for removing the seat, shroud, and batteries.
Steps to resolve issues when the scooter's systems appear dead.
Solutions for when the scooter does not move despite a full charge.
Addresses circuit breaker trips and motor hesitation/battery dips.
Maintenance for tyres, wheels, exterior surfaces, and battery terminals.
Care for plastic shrouds, axle bearings, and motor assembly.
Instructions for fuse replacement and nylon lock nut replacement.
Best practices for storing the scooter for extended periods, including battery care.
Guidance on disposing of the scooter according to regulations.
Details the two-year structural and one-year electronic warranty periods.
Lists items not covered, battery warranty, and service procedures.
Lists model number, overall length, width, tire type, wheels, and weight capacity.
Details horsepower, charger, max speed, grade, range, and turning radius.
Describes seating, braking systems, weight breakdown, and ground clearance.
Provides a diagram illustrating the scooter's overall dimensions and turning radius.