97
4.2.
Analogue control:
1.- Timer
2.- Timer pilot
3.- Thermostat
4.- Thermostat pilot
5.- Start button
After the first minutes of drying and the 6 minutes of Cool-down, the machine stops and is ready
to start a new cycle.
The green pilot light on the control panel (2) tells us that the machine is operating. The
red pilot light on the control panel (4) tells us that the heating is operating.
4.3. Digital control:
Select Button: selection
Start/Stop Button
Buttons
Increase/Decrease
. Prog Button: Programming
To Next Page
Loading...
