To Next Page
H
Hannah HorneJul 26, 2025
What to do if my Primera Label Maker is out of ink?
- JJames IbarraJul 26, 2025
If your Primera Label Maker runs out of ink, replace the ink cartridges. You may also need to perform an alignment and cleaning.
What to do if my Primera Label Maker is out of ink?
If your Primera Label Maker runs out of ink, replace the ink cartridges. You may also need to perform an alignment and cleaning.
What to do if my Primera Label Maker has a media/label stock jam?
If your Primera Label Maker experiences a media or label stock jam: 1. Press the UNLOAD button to reverse the media. 2. Remove any labels from inside the printer, especially in the print path. 3. Load new media.
What to do if my Primera LX800 Label Maker is out of label stock?
If your Primera Label Maker is out of label stock, install new label stock/media.
General| Brand | Primera |
|---|---|
| Model | LX800 |
| Category | Label Maker |
| Language | English |
Instructions for installing the printer driver and necessary software on both PC and Macintosh systems.
Step-by-step instructions for correctly installing and replacing ink cartridges in the printer.
Tutorial on creating and printing a sample label using the included NiceLabel software.
Step-by-step guide on how to create and configure barcodes within the NiceLabel software.
Guide to identifying and resolving common printer problems, indicated by LED status and error messages.
