EasyManua.ls Logo

Primera LX500 User Manual

Primera LX500
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
041116-511441
User's Manual
© 2016 All rights reserved
Question and Answer IconNeed help?

Do you have a question about the Primera LX500 and is the answer not in the manual?

Primera LX500 Specifications

General IconGeneral
Print MethodInkjet
Max Print Width4.25 inches
InterfaceUSB 2.0
Max Print Length24 inches
Print SpeedUp to 2.5 inches per second
Ink CartridgeSingle CMY
Operating System CompatibilityWindows, Mac
Media Width4.25 inches
Media Sensingcontinuous

Summary

Section 1: Getting Started

Unpacking and Inspection

Inspect the carton for damage and ensure all supplied accessories are included with the printer unit.

Section 2: Hardware and Software Setup

Installing Label Stock

Guides on how to load and prepare various types of paper label stock for printing.

Adjusting the Label Stock Gap Sensor Position

Instructions for adjusting the stock gap sensor for accurate label detection and alignment.

Installing the Ink Cartridge

Step-by-step guide for removing the old and installing a new ink cartridge.

Section 3: Using the Status Monitor

Adjusting Label Offsets

Fine-tune vertical and horizontal print position for accurate label alignment.

Section 4: Printing Using a PC

Using BarTender®

Guide to using the included BarTender software for label design and printing.

Section 5: Troubleshooting

Solving Offset/Alignment Problems

Addresses issues with image placement, vertical and horizontal offsets on the label.

Clearing a Label Jam

Steps to safely remove jammed label stock from the printer mechanism.

Related product manuals