Primera LX3000 - User Manual

Questions and Answers

A
Ashley FordAug 17, 2025
How to fix horizontally offset images on Primera Label Maker?
- W
  William KrauseAug 17, 2025
  If images are printing horizontally offset on your Primera Label Maker, here are some possible causes and solutions: * **Label Stock Loading:** Ensure that the label stock is loaded correctly. * **Left Margin Offset:** Adjust the left margin offset on the Alignment tab of the PrintHub. * **Page Size:** Increase the page size through the printer preferences enough to cover the label.
D
Dr. Paula SnyderOct 27, 2025
Why is the print quality poor on my Primera LX3000 Label Maker?
- K
  Kelsey MyersOct 27, 2025
  Poor print quality on your Primera Label Maker can stem from several factors. Here's what to check: * **Quality Setting:** Adjust your printer's quality setting. * **Cartridge:** Try cleaning the cartridge (either automatically or manually) or replacing it with a new one. * **Print Head:** Align the print head through the PrintHub or Printer Utility (Mac). * **Maintenance Station:** Clean the maintenance station after powering off the printer and gently moving the cartridge to the left. * **Color Matching:** Change the Color Matching setting to Graphics or Photos in the printer driver preferences. * **Media:** Ensure your label stock is inkjet printable. * **Source File:** Change the image mode of the original file, resave, and reprint. * **Copper Contacts:** Clean the cop...
G
Guy BranchNov 7, 2025
What to do if the image is vertically offset on my Primera LX3000 Label Maker?
- L
  Lauren TranNov 7, 2025
  If the image on your Primera Label Maker is vertically offset, consider these potential causes and solutions: * **Top of Form (TOF):** Adjust the TOF setting. Increase it to move the image down, or decrease it to move the image up on the label. * **Backing Material:** Test with the label sample material that came with the unit to rule out issues with nonstandard or non-translucent backing. * **Label Gap Distance:** Ensure the label gap distance meets specifications. * **Page Size:** Adjust the page size in the printer driver settings to match the label stock size. * **Orientation:** Verify that the Portrait/Landscape setting is correctly configured. * **Stock Sensor Position:** If using circular or non-rectangular die-cut labels, refer to instructions for adjusting the stock s...