Primera LX3000 - Section 2: Label Stock; Label and Roll Specifications

15
Section 2: Label Stock
2A. Label and Roll Specifications
A wide variety of label stock can be used in the Printer. Refer to the specifications and
settings in the following sections before ordering custom stock from Primera or any
stock from another company.
Important! Test all custom-made label stock with the intended Printer before ordering large
quantities! Primera will only assume responsibility for custom label stock ordered from
Primera.
Note: See table below for Max and Min values in inches and mm.
Label Width
Liner Width
Distance from
edge of Media
to edge of Label
Width of Opening
Black Mark
Width
Gap Between
Labels
Label Height
Gap Sensor Adjustment Range
Label Sensing Methods
Method 1
Label
:
Gap Sensing
Method 2
:
Through-Hole
Sensing
Method 3
:
Reflective/Black
Mark Sensing
(
Black Mark must be printed
on back side of label stock)