How to align the print head on Primera LX900e?
To align the print head, open the PTStatus Monitor and click on the 'Align Print Head' button on the Cartridge Utilities Tab (the second tab). Then, follow the onscreen prompts to load your paper for alignment.
When to change the print head on Primera Label Maker?
If print nozzles of certain colors are still clogged after repeated cleanings, it may be time to replace the print head.
How to clean the printhead on Primera LX900e Label Maker?
To resolve issues, run an automatic printhead cleaning print or manually clean the printhead as described in Section 5F.
How to align the printhead on a Primera LX900e Label Maker?
To align the printhead, open the PTStatus Monitor and click the "Align Printhead" button on the Cartridge Utilities Tab.
How to fix a vertically offset image on Primera Label Maker?
To correct a vertically offset image, increase the image setting to move the image down on the label, or decrease the setting to move the image up.
How to improve color matching on Primera LX900e?
Change your Color Matching setting to Graphics or Photos via the printer driver preferences.
How to adjust saturation on Primera LX900e?
If ink is bleeding, decrease saturation in driver preferences.
How to adjust cartridge settings on Primera LX900e?
Change the cartridge setting in the driver. Try Color + Black or Color only.
How to secure cartridges in Primera LX900e Label Maker?
Make sure the corresponding cartridge is snapped into place.
What to do if Primera LX900e isn't recognized (cable issue)?
Try another USB cable.
General| Brand | Primera |
|---|---|
| Model | LX900e |
| Category | Label Maker |
| Language | English |
Proper placement ensures adequate ventilation and prevents overheating.
Verify all accessories are included and check for shipping damage upon unboxing.
Familiarize yourself with the printer's front panel controls and indicator lights.
Recommended PC hardware for optimal printing performance.
Details on label dimensions, gap distance, and sensing methods.
Step-by-step guide for loading label rolls correctly into the printer.
Calibrating the sensor for non-standard or die-cut labels.
Configuring the sensor type (Die Cut, Reflective, Continuous).
Choosing how printed labels are presented after printing.
Checking current ink levels and print head life status.
Understanding the print head's remaining life and replacement recommendations.
Calculating the cost per label based on ink usage.
Procedure for replacing ink cartridges and understanding low ink warnings.
Creating labels with text, barcodes, and graphics, including barcode generation.
Setting page size and printing from non-NiceLabel programs.
Fine-tuning label positioning for accurate printing across different software.
Techniques for extending images to the edge of the label for full bleed prints.
Configuring printer driver preferences for optimal output.
Overview and configuration of utility settings: sensor, output, ink, cost.
Step-by-step guide for printing labels using Swift Publisher on Mac.
Guide for printing labels using Adobe Illustrator on Mac.
Instructions for printing labels from Adobe Acrobat Reader on Mac.
How to define custom paper sizes for printing on Mac.
Fine-tuning label positioning using the Mac utility for accurate printing.
Techniques for extending images to the edge of the label on Mac.
Diagnosing and fixing issues with label alignment on the print.
Addressing common print quality issues and their potential solutions.
Guidelines for achieving optimal color reproduction and design quality.
Procedure to create a diagnostic report for tech support.
Instructions for cleaning the printer casing and maintenance station.
Steps to clean print head nozzles for improved print quality.
Step-by-step instructions for replacing the printer's print head unit.
Understanding the meaning of printer LED status indicators for diagnostics.
Contact information and resources for obtaining technical assistance.
To Next Page
