C. IDENTIFYING THE PARTS
This illustration shows the front of the printer with its control
buttons and LED indicator lights.
The Ink Low LED will illuminate when a cartridge has 10% or
less of its ink remaining.
The Power LED indicates that the printer is on and ready to
receive print jobs.
The Ink Button moves the carriage to the center to allow for
loading of the ink cartridge. Once the cartridge is loaded,
press the ink button again.
The Load/Feed Button is pressed in order to load label stock or
form feed the label stock through the printer.
The Unload Button will unload the installed label stock by
reversing it through the printer. Make sure to tear off the
printed labels before pressing the Unload Button.
The Label Tear Bar is a serrated edge for conveniently tearing
your finished labels from the printer.
Unload Button
Ink Button
Power LED
Load/Feed Button
Ink Low LED
Label Tear Bar
Top Cover
Getting Started 3
Label Stock TOF
Sensor Bar
To Next Page
Loading...
Need help?
General
