11 Measuring and displaying with the Cube
11.1 Safety instructions
DANGER
Severe eye or skin injury due to laser radiation
During the measurement the laser beam is guided on the device, which
causes scattered or directed reflection of the laser beam (laser class 4).
X
Please wear safety goggles adapted to the power, power density, laser
wave length and operating mode of the laser beam source in use.
X
Wear suitable protective clothing and protective gloves.
X
Protect yourself from laser radiation by separating protective devices
(e.g. by using appropriate shielding).
CAUTION
Cutting hazard
Contamination and fingerprints on the protective window can lead to da-
mage or shattering or splintering of the protective window during measu-
ring operation.
X
Do not touch the protective window.
X
Regularly check the condition of the protective window and exchange it
in case of pollution (see chapter13.1, „Exchanging the protective win-
dow“, on page25).
X
Only operate the device with a clean protective window.
ACHTUNG
Damaging/Destruction of the device
The maximum permissible energy per laser pulse depends on various
variables, including the absorber temperature.
X
Please observe the limit values and dependencies specified in chap-
ter15, „Technical Data“, on page29 and chapter18, „Appendix“, on
page33 before the measurement.
To Next Page
Loading...
Need help?
General
