24
HOW TO CONNECT YOUR HEART RATE MONITOR
TO THE CONSOLE
The console is compatible with all BLUETOOTH Smart
heart rate monitors.
To connect your BLUETOOTH Smart heart rate moni-
tor to the console, press the iFit Sync button on the
console; the console pairing number will appear in the
display. When a connection is established, the LED on
the console will flash red twice.
Note: If there is more than one compatible heart rate
monitor near the console, the console will connect to
the heart rate monitor with the strongest signal.
To disconnect your heart rate monitor from the console,
press and hold the iFit Sync button on the console until
the LED on the console turns solid green.
Note: All BLUETOOTH connections between the
console and other devices (including any tablets, heart
rate monitors, and so forth) will be disconnected.
THE SETTINGS MODE
1. Select the settings mode.
To select the settings mode, press and hold down
the Manual Control button until the settings mode
information appears in the display.
2. Navigate the settings mode.
Press the Tempo Apps button repeatedly until the
desired settings option appears in the display.
3. Change settings as desired.
Change the Unit of Measurement—The display
will alternate showing the console version number
and the unit of measurement.
The console can show
weight, pedaling speed,
and distance in stan-
dard or metric units of
measurement. An E for
English miles or an M
for metric kilometers will appear in the display. To
change the unit of measurement, press the Interval
Apps button repeatedly.
View Usage
Information—The
display will alternate
showing the total time
(in hours) that the
console has been used
since the exercise bike was purchased and the
total distance (in miles or kilometers) that the exer-
cise bike has been pedaled.
Turn the Demo Mode
Off or On—The console
features a demo mode,
designed to be used if
the exercise bike is dis-
played in a store. Press
the Silent Magnetic Resistance increase button
repeatedly to turn the demo mode on or off.
4. Exit the settings mode.
Press the Tempo Apps button repeatedly to exit the
settings mode.
To Next Page
Loading...
Need help?
General
