Pro-Form 385 CSX User Manual

8
7. Connect the console wire harness to the Upper
Wire Harness (36). Insert the console wire har-
ness into the Upright (13). Attach the Console
(16) to the Upright with four M4 x 16mm Screws
(57).
Attach the Water Bottle Holder (8) to the Upright
(13) with two M4 x 22mm Screws (52).
7
16
13
36
52
8
Console
Wire
Harness
57
6. The Console (16) can use four 1.5V D batteries
(not included); alkaline batteries are recom-
mended. IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
c
omponents. Remove the battery cover and
insert the batteries into the battery compart-
ment. Make sure to orient the batteries as
shown by the diagram inside the battery
compartment. Then, reattach the battery cover.
To purchase an optional power adapter, call
the telephone number on the cover of this
manual. To avoid damaging the console, use
only a manufacturer-supplied power adapter.
Plug one end of the power adapter into the jack
on the console; plug the other end into an outlet
installed in accordance with all local codes and
ordinances.
16
Batteries
Battery
Cover
6
All manuals and user guides at all-guides.com

Pro-Form 385 CSX Specifications

General

Brand	Pro-Form
Model	385 CSX
Category	Exercise Bike
Language	English