Pro-Form 405 SPX - Attach Rear Stabilizer; Install Saddle

7
2
9
3
5
1
3
3.
Attach the Rear Stabilizer (5) to the Frame (1)
with two M8 x 55mm Carriage Bolts (9), two M8
Washers (3), and two M8 Flange Nuts (2).
4
4. Orient the Saddle (31) as shown.
Slide the Saddle (31) onto the Saddle Carriage
(32); make sure that the Saddle is level and is
pointing straight ahead. Then, tighten the two
nuts (A) beneath the Saddle.
32
A
31