12
15. Slide the Left Base Leg Cover (96) onto the Base
(48) as shown. Attach the Left Base Leg Cover
with three 1/2" Screws (6).
Be careful not to
overtighten the Screws.
6
48
6
6
15
16. Tighten a 1/2" Screw (6) into each side of the
Base (48) and each Base Leg Cover (96, 94). Be
careful not to overtighten the Screws.
6
94
96
48
16
96
14. Attach the ground wire on the Upright Wire (28)
to the indicated hole in the Base (48) with a
S
ilver Ground Screw (27).
P
ress the indicated grommet into the Right
Upright (36).
Slide the Right Base Leg Cover (94) onto the
Base (48) as shown. Attach the Right Base Leg
Cover with three 1/2" Screws (6). Be careful not
to pinch the Upright Wire (28). Do not over-
tighten the Screws.
94
48
28
36
6
6
G
rommet
Ground Wire
6
1
4
27
To Next Page
Loading...
Need help?
General