13
16. IMPORTANT: See page 15 and plug in the
power cord. Next, see page 17 and turn on
the power.
Then, see page 26 and follow the instruc-
tions under “The incline of the treadmill
does not change correctly.” Note: This will
calibrate the incline.
When the frame stops moving, remove the
key from the console and unplug the power
cord.
16
IMPORTANT:
Make sure to follow all
instructions in this step.
15. Attach the Left Tray (107) and the Right Tray
(108) to the console assembly with four #8 x 1/2"
Screws (1).
107
108
15
Console
Assembly
1
1
1
To Next Page
Loading...
