17
22. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the oor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 29 and 30). Note: Extra parts may be
included.
21. Attach the Tablet Holder (88) to the back of
the console assembly (G) with four #8 x 1/2"
Machine Screws (8); start all four Machine
Screws, and then tighten them. Do not over-
tighten the Machine Screws.
21
88
8
8
G
To Next Page
Loading...
Need help?
General