Orion Sentry by Orion
Revision 2.8 Semi-Automatic Stretch Wrapping Machine
27 August 2014 System Operation
Page 3-5
Starting and Shutting Down
Power On/ Off Switch
Located on the control panel, the rotary power switch has two settings:
• ON - connects a power source to the machine.
• OFF - disconnects the power source.
Program Execute and E-Stop Buttons
•The PROGRAM EXECUTE button starts the program that is displayed on the LCD
screen. If you are not viewing a program on the LCD screen, this button will not start
the machine. If you press ESC while the machine is running the displayed automatic
program, the machine will stop.
• The cycle may be stopped at anytime by pressing the E-STOP button.
To Next Page
Loading...
