ProCurve 2610 - Displaying ACL Data; Display an ACL Summary

Access Control Lists (ACLs)
Displaying ACL Data
Displaying ACL Data
ACL Commands Function Page
show access-list
show access-list config
show access-list ports
< all | < interface >>
show access-list < acl-
name-string >
show access-list resources
show access-list radius
show config
show running
View a brief listing of all ACLs on the
switch.
9-54
Display the ACL lists configured in the
switch.
9-55
List the name and type of ACLs assigned
to all ports on the switch or to a
particular port or static trunk configured
on the switch.
9-56
Display detailed content information for
a specific ACL.
9-57
Displays the current rules and
resources used.
9-59
Displays ACLs applied via RADIUS See chapter on
RADIUS ACLs in this
guide
show config includes configured ACLs
and assignments existing in the startup-
config file.
show running includes configured ACLs
and assignments existing in the running-
config file.
Display an ACL Summary
This command lists the configured ACLs, regardless of whether they are
assigned to any interfaces.
Syntax: show access-list
List a summary table of the name, type, and application status
of all ACLs configured on the switch.
For example:
9-54