Web and MAC Authentication
Configuring MAC Authentication on the Switch
Configure the Switch for MAC-Based Authentication
Command Page
Configuration Level
aaa port-access mac-based addr-format 3-24
[no] aaa port-access mac-based < port-list > 3-25
[addr-limit] 3-25
[addr-moves] 3-25
[auth-vid] 3-25
[logoff-period] 3-26
[max-requests] 3-26
[quiet-period] 3-26
[reauth-period] 3-26
[reauthenticate] 3-26
[server-timeout] 3-26
[unauth-vid] 3-27
Syntax: aaa port-access mac-based addr-format
<no-delimiter | single-dash | multi-dash | multi-colon | no-delimiter-
uppercase | single-dash-uppercase | multi-dash-uppercase | multi-
colon-uppercase>
Specifies the MAC address format to be used in the
RADIUS request message. This format must match the
format used to store the MAC addresses in the RADIUS
server. (Default: no-delimiter)
no-delimiter — specifies an aabbccddeeff format.
single-dash — specifies an aabbcc-ddeeff format.
multi-dash — specifies an aa-bb-cc-dd-ee-ff format.
multi-colon — specifies an aa:bb:cc:dd:ee:ff format.
no-delimiter-uppercase—specifies an AABBCCDDEEFF
format
single-dash-uppercase—specifies an AABBCC-DDEEFF
format
3-24
To Next Page
Loading...
