PRODEM PRB008 - Product Information and Identification; Hydraulic Hammer Component Overview

- 11 -
3. Product information
3.1. Configuration of the PRODEM hydraulic hammer
The PRODEM hydraulic hammer has the following main components or assemblies
1
2
3
4
5
6
7
9
10
11
12
13
14
15
16
17
18
19
20
21
8
1. Cylinder
2. Piston
3.
Valve
4. Cylinder bush
5. Accumulator
6. Front-head
7. Chisel bush
8
Thrust ring
9. Chisel pins
10. Front bush
11. Chisel
12. Back-head
13. Minimess coupling
14. Through bolts
15. Front-head nuts
16. Back-head nuts
17. Lower damper
18. Wear plates
19.
Support damper
20. Upper damper
21. Bracket
The graphic shows only a general view of the main components, the actual details may vary on different
models of hydraulic hammer.
The hammer is hydraulically operated equipment, and can be used on any carrier that meets the necessary
hydraulic and mechanical installation requirements (Refer to Section “4. Technical specifications”).