Prodys Quantum ST - Chapter VII: Detailed Ports Description; Management Ports; Streaming Ports

Prodys S.L. Tel: +34 91 6896880  Fax: +34 91 6943777  Email: sales@prodys.net  Web: www.prodys.com
Page 115
DETAILED PORTS DESCRIPTION
There are two main groups of ports: Management and Streaming ports:
VII.1 Management Ports
ProdysFlashPlus
UDP 50013: This port is used by the ProdysFlashPlus upgrading
application to allow the communication with Prodys IP units.
ProdysControlPlus
TCP 54001: This port is used for accessing the codec through the
ProdysControlPlus Management Software.
Web Page
TCP 80: This port is used for web control via HTTP (web browser).
VII.2 Streaming Ports
TCP 53000: P-RTCP (Control): This port is used to control any IP
streaming communication. This port can be disabled. In this case, there
will be a lack of control in the status of the connection at the far end, and
both ends will have to initiate the connection.
UDP 53000: P-RTP Unicast PROGRAM audio and auxiliary data channel:
This port is used to carry the audio and auxiliary data over IP for unicast
communications on the PROGRAM line.
UDP 53001: P-RTP Unicast TALKBACK audio channel: This port is used
to carry the audio data over IP for unicast communications on the talkback
channel.
Chapter VII