16
5 CALLER IDENTIFICATION
5.1 INTRODUCTION:
If you have the service Caller Identication at your disposal, the number of
the calling party is displayed on the display of your handset(s).
You have programmed this number including name and the phone book
memory of the handset, the name is also displayed on the display and
you can set an individual ringtone for each memory. Each handset has a
memory for 10 calls.
5.2 INDICATION NEW CALLS:
The display of the handset shows how many new calls
you’ve received since the last time you checked the
memory.
5.3 VIEW MEMORY AND CALLBACK:
press the
button and use the and buttons to
scroll the memory
if a name is shown, you can press the # button to dis-
play the number
new calls are indicated by a star in the display
the triangular arrow pointing to the right indicates that
there are additional digits at the right side of the dis-
played number; press the # button to show these digits
press the Call button to dial the selected number
To Next Page
Loading...