7
2.2 HANDSET:
1. Open the battery compartment of the handset, by sliding the battery
cover down.
2. Insert the batteries into the battery compartment; at this, pay atten-
tion to the polarity (+ and -).
3. Slide the battery cover back onto the handset and place the handset
on the base station.
4. Leave the handset continuously during 15 hours on the base station,
to charge the batteries properly.
INSERT ONLY RECHARGEABLE NiMH (NICKEL METAL
HYDRIDE) BATTERIES. THE USE OF NON RECHARGE-
ABLE BATTERIES MAY CAUSE DANGEROUS SITUATIONS OR
EXPLOSION HAZARD.
2.3 EXTRA HANDSET AND CHARGER: (PDX-2608 DUO)
2 batteries and a charger with adapter will be included for every
handset. Plug the adapter of these chargers in a 230 Volt mains
socket, insert the batteries into the handset(s) and place the
handset(s) on the charger(s) for 15 hours to charge the batteries.
To Next Page
Loading...
