36
[ EQUALIZER ]
You can use the equalizer to (extra) amplify the treble or bass levels. This
tone control is disabled when set to ‘natural’
[ SELECT BASE ]
When the handset is registered to multiple base stations, than use this menu
option to link the handset to the prefered base station.
[ LANGUAGE ]
Here you can set the language in which the various messages are dis-
played on the display.
You can restore a known language as follows in case you’ve set an un-
known language accidentally:
1. press:
2. now use
and
to select the desired language
3. press
to conrm
[ RENAME HS ]
Use this option to assign a personal name to the handset of up to 10 char-
acters. Use the C button to delete the old name.
See paragraph 7.7 for all available characters.
[ HS DISPLAY ]
Here you can determine whether the handset name or actual time must be
shown with the handset in standby mode.
[ AUTO ANSWER ]
Here you can determine whether an incoming call can be answered direct-
ly by picking up the receiver from the base or charger. With this function
disabled, you must always press the Call button to accept incoming calls.
To Next Page
Loading...
