ProForm 1010 Zlt Treadmill Manuel De L'Utilisateur

ProForm 1010 Zlt Treadmill

36 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

www.iconeurope.com

MANUEL DE L’UTILISATEUR

ATTENTION

Lisez toutes les précautions et

les instructions contenues dans

ce manuel avant d’utiliser cet

appareil. Gardez ce manuel pour

vous y référer ultérieurement.

Nº. du Modèle PETL11711.1

Nº. de Série

Écrivez le numéro de série sur la

ligne ci-dessus pour référence.

QUESTIONS ?

Si vous avez des questions ou si

des pièces sont manquantes, veuil-

lez nous contacter au :

(33) 0810 121 140

du lundi au jeudi, de 9h00 à

13h00 et de 14h00 à 18h00, et

le vendredi de 14h00 à 17h00 (à

l’exception des jours fériés)

Courriel :

sav.fr@iconeurope.com

Site internet :

www.iconsupport.eu

Autocollant du

Numéro de Série

Table of Contents

Other manuals for ProForm 1010 Zlt Treadmill

User Manual36 pages

Manuale D'Istruzioni36 pages

Gebruikershandleiding36 pages

Bedienungsanleitung36 pages

Manual Do Utilizador36 pages

Questions and Answers:

A
Alexander HernandezJul 30, 2025
How to fix ProForm 1010 Zlt Treadmill when the power does not turn on?
- A
  Adrian LoveJul 30, 2025
  If your ProForm Treadmill doesn't turn on, ensure the power cord is plugged into a grounded outlet. For extension cords, use a 3-conductor, 14-gauge cord no longer than 5 ft. Also, verify that the key is inserted into the console and check the power switch on the treadmill frame. If the switch is tripped (protruding), wait five minutes, then press it back in to reset.
M
Michael GarciaAug 4, 2025
What to do if the displays of the console on my ProForm 1010 Zlt Treadmill do not function properly?
- J
  Jacob DonovanAug 4, 2025
  If the displays of the console on your ProForm Treadmill aren't functioning correctly, first remove the key and unplug the power cord. Then, with assistance, carefully tip down the Uprights. Check for three #8 x 2" Screws in the bottom of the Belly Pan and remove them if present. Also, check the power switch; if it's tripped, wait five minutes before pressing it back in. Ensure the power cord is plugged in, or try unplugging it, waiting five minutes, and plugging it back in. Finally, remove and reinsert the key, then raise the Uprights.
C
Christine YoderAug 9, 2025
How to adjust incline that does not change correctly on ProForm 1010 Zlt Treadmill?
- J
  Janet YoungAug 9, 2025
  To correct the incline on your ProForm Treadmill, hold down the Stop button and the Speed increase button, insert the key into the console, and then release both buttons. Next, press the Stop button, followed by either the Incline increase or decrease button.
E
Eric GravesAug 14, 2025
Why does the walking belt on my ProForm 1010 Zlt slow down when I walk on it?
- K
  Kaitlyn MunozAug 14, 2025
  If the walking belt of your ProForm Treadmill slows down when you walk on it, it might be overtightened. Remove the key and unplug the power cord. Then, use a hex key to turn both idler roller screws counterclockwise by 1/4 of a turn. The belt should be properly tightened when you can lift each edge 2 to 3 inches off the platform. Your treadmill has a high-performance lubricant on the walking belt, so avoid applying silicone spray or other substances unless advised by an authorized service representative.
M
Micheal RangelAug 19, 2025
What to do if the walking belt is off-center or slips when walked on ProForm Treadmill?
- A
  Amanda FloresAug 19, 2025
  If the walking belt of your ProForm Treadmill is off-center or slips, first remove the key and unplug the power cord. If the belt has shifted left, turn the left idler roller screw clockwise 1/2 turn. If it has shifted right, turn the left idler roller screw counterclockwise 1/2 turn. If the belt slips, turn both idler roller screws clockwise 1/4 turn until you can lift each edge of the belt 2 to 3 inches off the platform.
H
Haley RamirezAug 25, 2025
Why do the console displays remain lit when I remove the key from the ProForm 1010 Zlt console?
- K
  Kenneth CookeAug 25, 2025
  The console on your ProForm Treadmill may be in display demo mode, which is intended for store displays. To disable this mode, press and hold the Stop button for a few seconds.

ProForm 1010 Zlt Treadmill Specifications

General

Brand	ProForm
Model	1010 Zlt Treadmill
Category	Treadmill
Language	English

Related product manuals

Preview: ProForm 1350 Zlt Treadmill

ProForm 1350 Zlt Treadmill

Preview: ProForm 400 Zlt Treadmill

ProForm 400 Zlt Treadmill

Preview: ProForm 620 Zlt Treadmill

ProForm 620 Zlt Treadmill

Preview: ProForm 705 Zlt Treadmill

ProForm 705 Zlt Treadmill

Preview: ProForm 710 Zlt Treadmill

ProForm 710 Zlt Treadmill

Preview: ProForm 900 Zlt Treadmill

ProForm 900 Zlt Treadmill

Preview: ProForm 905 Zlt Treadmill

ProForm 905 Zlt Treadmill

Preview: ProForm 700 Zlt Cwl Treadmill

ProForm 700 Zlt Cwl Treadmill