23
THE INFORMATION MODE/DEMO MODE
T
he console features an information mode that keeps
track of treadmill usage information and allows you to
s
elect a unit of measurement for the console.
To select the information mode, insert the key into the
console while holding down the Stop button, and then
release the Stop button. When the information mode is
selected, the following information will be shown:
An “E” (for English) or an “M”
(for metric) will appear in the
lower right display. Press the
Speed increase button to
change the unit of measure-
ment, if desired.
IMPORTANT: If a “d” appears in the lower right dis-
play, the console is in the “demo” mode. This mode is
intended to be used only when a treadmill is displayed
in a store. When the console is in the demo mode, the
power cord can be plugged in, the key can be removed
from the console, and the display will remain lit, al-
though the buttons will not operate.
If a “d” appears
when the information mode is selected, press the
Speed decrease button so the “d” disappears.
The upper display will show
the total number of hours
that the treadmill has been
used.
The lower left display will
show the total number of
k
ilometers (or miles) that the
walking belt has moved.
To exit the information mode, remove the key from the
console.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor adds even more fea-
tures to the console. The chest pulse sensor offers
hands-free operation, and enables you to use the con-
sole’s four heart rate programs.
To purchase the op-
tional chest pulse sensor, call the telephone num-
ber on the front cover of this manual.
To Next Page
Loading...
Need help?
General