6
1.
Identify and orient the Rear Stabilizer (4) as
s
hown.
See HOW TO FOLD AND UNFOLD THE
ELLIPTICAL on page 15 and unfold the ellip-
tical.
While a second person lifts the Folding Frame
(2), attach the Rear Stabilizer (4) to the Folding
Frame with two M10 x 95mm Patch Screws
(100).
4
1
To make assembly easier, read the
i
nformation on page 5 before you begin.
100
2
2. Orient the Front Stabilizer (3) so that the welded
tubes are facing away from the Main Frame (1).
While a second person lifts the front of the Main
Frame (1), attach the Front Stabilizer (3) to the
Main Frame with two M10 x 95mm Patch
Screws (100).
2
3
1
100
Welded
Tubes
To Next Page
Loading...
Need help?
General
