ProForm PRO 2000 User Manual

16
19
18. Remove the 5/16" Nut (9) and the 5/16" x
2 1/4" Bolt (4) from the bracket on the Latch
Crossbar (78).
Align the upper end of the Storage Latch (56)
with the bracket on the Frame (52), and insert
the 5/16" x 2 1/4" Bolt (4) through the bracket
and the Storage Latch. This will push a
spacer (M) out of the Storage Latch; discard
the spacer.
Next, tighten the 5/16" Nut (9) onto the 5/16" x
2 1/4" Bolt (4). Do not overtighten the Nut; the
Storage Latch (56) must be able to pivot.
Then, lower the Frame (52) (see HOW TO
LOWER THE TREADMILL FOR USE on page 30).
78
4
9
56
M
18
52
19. Firmly tighten the four 3/8" x 2 3/4" Screws (23)
and the four 3/8" x 1 1/4" Screws (20).
Next, slide and the Left and Right Upright Covers
(89, 90) down until they snap into place.
90
89
23
23
23
20
20

ProForm PRO 2000 Specifications

General

Speed Range	0-12 MPH
Running Surface	20" x 60"
Weight Capacity	300 lbs
Display	7" Backlit LCD
Folding	Yes
Heart Rate Monitoring	EKG Grip Pulse
Bluetooth	Yes
Cooling Fan	CoolAire Fan
Audio	Dual 2" Speakers
Incline Range	-3% Decline to 12% Incline Digital Control