With the help of another person, lift the Frame
(1) and place a packing insert (not shown)
under the Frame. Have the other person hold
the Frame to prevent it from moving from side
to side until you complete this step.
Attach the Front Stabilizer (3) to the Frame (1)
with two M10 x 80ram Patch Screws (47) and
two M10 Split Washers (48).
3
48
47
2,
Attach the Rear Stabilizer (2) to the Frame (1)
with three M10 x 64mm Patch Screws (52).
6
To Next Page
Loading...
