Main characteristics/advantages VIBRA-series
Fully continuous and automatic registration of
the vibration peak values during a long period of
time.
The VIBRA-series is in accordance with national
and international standards ‘Vibration in
buildings' - Effects on structures' and 'Effects on
persons in buildings', such as the DIN 4150 –
part 2 and 3, DIN 45669 and the SBR 2002
Real-time interpretation and verification of the
vibration levels against ruling codes
Unattended vibration measuring for weeks due to the high-tech, low power
consumption electronic design in combination with software intelligence.
Compact, robust field-computer that is very easy to operate.
Professional and fast (graphical) presentation of the monitoring results.
The option to connect an external alarm beacon to the system.
Easy comparison of measuring results: more than one VIBRA can be installed at the
same location and the units are easily synchronized.
Specific advantages of the VIBRA
+
Full compliance with DIN 4150 - part 2 and 3/SBR – part A, B including:
o Simultaneous measurements
o Dominant frequency determination with FFT method
o Software processing
o KBft and Kbfmax/Veff,max
Smart alarm (frequency dependent alarm)
Daily status and data e-mail via GPRS/internet
E-mail alarm via GPRS/internet
Peak displacement recorded for each channel
Automatic level- and calibration checks
VIBRA PC Trace Recorder (for continuous trace time/velocity trace recording)
© 2007 Profound
Profound B.V.
P.O. Box 469
2740 AL Waddinxveen
The Netherlands
Phone +31 182 640 964
Fax +31 182 649 664
E-mail info@profound.nl
Website www.profound.nl
To Next Page
Loading...