ProGlove MARK BASIC - 1 St Step: Open Configurations; 2 Nd Step: Create a New Configuration; 3 Rd Step: Connectivity Configuration

36
Test_Cong2
Test_Cong1
1
ST
STEP: OPEN CONFIGURATIONS
1. Go to Configurations in the INSIGHT navigation.
2. Select a saved configuration or create a new one.
 To install a saved configuration proceed with step 7.
2
ND
STEP: CREATE A NEW
CONFIGURATION
 Choose which connectivtiy option is used and
need to be configurated.
3
RD
STEP: CONNECTIVITY
CONFIGURATION
It is possible to configure the connectivity settings
according to the end device.
Gateway Multipairing: It is also possible to adjust
the maximum number of scanners that can connect
to the Gateway (up to 5 devices).
 Choose the preferred settings.