EasyManua.ls Logo

ProGlove MARK BASIC - Safety Instructions

Default Icon
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
SAFETY INSTRUCTIONS
HARDWARE
CAUTION
Keep all cables and wires away from high voltage sources or
power supplies! This may otherwise lead to damage or faults
due to overvoltage, line noise, electrostatic discharge or other
irregularities.
CAUTION
Do not use damaged cables or power supplies! Otherwise the
safe functioning of ProGlove system cannot be ensured.
CAUTION
Do not unscrew the Hardware housing! This may otherwise
lead to ProGlove system not functioning properly.
CAUTION
Do not replace the battery of the scanner! This may otherwise
lead to ProGlove system not functioning properly.
CAUTION
Do not modify ProGlove system! This may otherwise lead to
ProGlove system not functioning properly.
CAUTION
Do not stare directly into beam! Use of controls, adjustments
or performance of procedures other than those specied
herein may result in hazardous laser light exposure. Class 2
laser scanners use a low power, visible light diode. As with any
very bright light source, such as the sun, the user should avoid
staring directly into the light beam. Momentary exposure to a
Class 2 laser is not known to be harmful.
CAUTION
Do not use, charge, or leave the device near/or in re, heaters,
high-temperature sources, or in a car under the blazing sun.
Such a high temperature may cause damage to the protection
structure in the battery, which may result in an abnormal reac-
tion, and then heat generation, explosion, or re.
CAUTION
Do not use the scanners in a place where static electricity
(more than the limit of the manufacturer’s guarantee ) occurs.
Otherwise, the protecting device in the battery might be dam-
aged and cause heat generation, explosion, or re.
CAUTION
Do not ship any severely damaged device especially if the
battery is also severely damaged. Otherwise, the protecting
device in the battery might be damaged and cause heat gener-
ation, explosion, or re.
WEARABLES
CAUTION
Keep Wearables away from moving machine parts and do
not use without a scanner. Otherwise the Wearables may get
stuck on objects.
CAUTION
Use Wearables in the right size!
Otherwise this may cause pain or pressure points on your
hand.