49
PROBLEM CAUSE SOLUTION
Scanner does not charge in Charging
Station.
Scanner is not correctly inserted in
Charging Station.
Insert scanner in the
Charging Station again.
Charging Station is not connected
to power source.
Connect Charging Station to power source.
Scanner is defective. Scanner must be replaced.
More detailed information can be found at
docs.proglove.com
Charging Station is defective. The Charging Station must be replaced.
More detailed information can be found at
docs.proglove.com/en/charging-stations.
SCANNER GATEWAY
Factory Default Barcode will reset all configurations!
CHARGING STATION
TIP 1
Problem could not be solved?
Insert scanner into the wearable.
Press the trigger on the wearable for
about 15 seconds and restart scanner.
TIP 2
Problem could not be solved?
Scan with scanner the Factory Default Barcodes:
To Next Page
