48
PROBLEM CAUSE SOLUTION
Barcode data is not transferred. Scanner is not connected to the
Gateway.
1. Scan the pairing barcode on the Gateway.
2. Lights up blue twice briefly while scanner
is connecting and after a successful
connection.
Scanner is out of range of the
Gateway. (Maximum range is
100 - 130 ft. (30 - 40m))
Bring scanner closer to the Gateway.
Gateway is defective. Gateway must be replaced.
More detailed information can be found at
docs.proglove.com/en/gateway.
Scanner is defective. Scanner must be replaced.
More detailed information can be found at
docs.proglove.com.
GATEWAY - DATA TRANSFER
To Next Page
