13
Parameters | Fertilization
User Manual | Agrónic 2500
Parallel fertilization
Series fertilization
FERTILIZATION PARAMETERS
N. fertilizers: 4
Fertilizer general: yes
Mixer F1: no
Mixer F2: yes
Mixer F3: yes
Mixer F4: no
Pre-mixing: 015”
Mixing start: 030”
Mixing stop: 120 ”
Last cleaning: 030”
Number of fertilizers (0 ... 4): enter in the unit the number of
fertilizers installed in the irrigation network.
Leave the value at 0 if there are none.
Fertilizing general (No | Yes): is an output normally used
to connect the injector in series application and is only
activated when one of the fertilizers activates. Enter ‘Yes’ if
it is going to be used.
Fertilizing mixer (No | Yes): each fertilizing can be assigned a
separate mixer. Indicate which fertilizers have a mixer.
Pre-mixing (000 ... 999”): time that the fertilizer will be
stirred before starting fertilization. Pre-mixing comes in
To Next Page
Loading...
