6
User Manual | Agrónic 2500
Description of basic functions
PUMPING
It has 2 general irrigation outputs, or pumps.
One of the pumps can be a motor pump or generator
set. Each sector is assigned with the pumps associated
to it.
The pumps are activated together with the sector.
There are time delays to separate the activation of the
pump from that of the sector during activation as well
as in stop.
in series: one type of fertilizing aer another from a
single injector
Series fertilization
IRRIGATION
FERTILIZER 1
20 L
30 L
12 L
FERTILIZER 2
FERTILIZER 3
FILTER CLEANING
Configured for 0 to 9 filters, with selectable cleaning
times. Programmable pause between filters.
Washing sequence may be started by the pressure dif-
ferential and/or according to the time or volume of the
water circulation.
Whether or not the irrigation sectors and fertilizers are
stopped while the filters are being cleaned is configu-
rable.
Control over malfunctions due to continuous cleanings.
A general filter output can be configured.
Parallel: various fertilizers simultaneously with one
injector per type
Parallel fertilization
IRRIGATION
FERTILIZER 1
FERTILIZER 2
FERTILIZER 3
MANUAL
Through manual commands, the unit can:
• Start or stop a program
• Leave the unit out of service or on general stop
• Start or stop filter cleaning
• Terminate alarms and malfunctions
• Set the sectors to manual start, manual stop or
automatic
• Erase totals
• Activate the outputs
To Next Page
Loading...
