Progrés Agronic 2500 - Page 8

8
User Manual | Agrónic 2500
Description of basic functions
SUMMARY OF PLUS VERSION FEATURES
The Agrónic 2500 with the Plus option oers a notable
increase in features as per the basic version, which may
come from the factory with the options pre-activated
or be done so at any time during its operable lifespan
to meet any new demands that arise in the facility.
• In the Programs function, in addition to the classic
irrigation operation based on days of the week,
there is a day frequency function, allowing irriga-
tions to be repeated every certain amount of days,
for example, every two days, one day on, one day
o, etc.
• Programs with several activations separated by an
amount of time in hours and minutes, thus irrigat-
ing by pulses.
• Programs with active schedules to limit the irri-
gation application within a schedule; useful when
starting irrigation by sensor.
• Programs with active periods to limit the operation
of each program to specific dates.
• Programs with safety times (hh:mm) between irri-
gation periods to prevent continuous commands;
useful when commands are sensor activated and
an incident occurs.
• Uniform fertilization. Uniform application is added
in parallel and by volume for the most homoge-
neous fertilizer distribution possible within the ir-
rigation units.
• New format in the irrigation and fertilization pro-
gramming, in cubic meters per hectare (m3/ha)
and liters per hectare (L/ha), respectively, where
the unit makes the calculations for the units to be
applied at the start of every irrigation.
• In Determining factors, the number of operating
determining factors has been increased from 5 to
30. They can also aect all the unit or be assigned
to specific irrigation programs; digital, analog or
meter sensors can be used, or the data integrated
from a previous irrigation; they can result in just
a record being created or an anomaly and send a
warning SMS message.
Operatives:
‒ Definitive stop.
‒ Temporary stop.
‒ Conditioned stop.
‒ Start and stop irrigation programs.
‒ Warning.
‒ Modify irrigation.
‒ Modify fertilizing.
‒ End due to rain.
‒ Filter pressure gage.
‒ Diesel pressure gage
‒ Stop fertilizing
• Text descriptions for programs, sectors, sensors
and determining factors.
• Possibility for 10 meters (up to 4 for fertilizing and
the rest for irrigation) plus 40 analog sensors and
20 digital sensors.
• Manual commands so programs can be placed out
of service, suspended for a certain number of hours
or modified to change the day frequency meter
or pending actions. As for determining factors,
these may be deactivated or a definitive stop can
be terminated. As for sectors, these can be le
in automatic or manual start mode or in manual
stop mode. As for sensors, the manual commands
permit values to be entered on a virtual sensor.
• In Readings, there are new record and history
sections. Chronological and detailed records are
made of each event occurring in the unit. The
history of the irrigation and fertilizing totals is
based on the time and volume applied per sector,
grouped in days on the unit and in 10-minute
fractions from Agrónic APP/VEGGA/Agrónic PC.
History for each analog sensor, with the average,
maximum and minimum value, of the day on the
unit and in 10-minute fractions on the Agrónic APP/
VEGGA/Agrónic PC. History of each meter sensor,
with the irrigation or fertilizing value plus the leak
value in daily values or in 10-minute fractions on
the Agrónic APP/VEGGA/Agrónic PC.