12 | Page
Trailer & Housing
Outriggers/Jack Stands - to level unit and support the raised light
tower mast. Deploy outriggers/jacks for stability. Located at the front
(optional), rear and tongue of the trailer to provide stability while light
tower is deployed.
Tongue Jack Stand- Jack stand is used to level and
support the tongue and enable attachment /
detachment of the light tower to a vehicle for towing.
Lunette Ring or Ball Hitch - Coupler attaches trailer
to vehicle. Make sure vehicle hitch and coupler are a
match and trailer is securely attached to vehicle.
Safety Chain(s)- Safety chain attaches to vehicle
towing the trailer.
Light / Brake Quick Connects- 7 pin or 4 pin Quick connects attach
wiring of trailer lights and brakes to towing vehicle.
D-ring Tie-Down Points- Used to secure
tower with straps / chains in order to apply
equal force to both ends of the light towers
if transported via a flat-bed truck or trailer
while in tow. Locations vary by model.
To Next Page
Loading...
General