4. Press [SET] button to confirm and store the frequency into
memory, and you will operate in the Channel mode.
5. Turn off the radio, press and hold [SET] button and turn on the
radio, the radio will switch back VFO mode. So you may now
enter other frequencies, and store them into additional memory
channels, by repeating the above process.
6. Under Channel mode, turn off the radio, press and hold [
]
button and turn on the radio, ‘DEL?’ will be displayed. Press [
]
or [
] button to select the channel number you wish to delete,
press [SET] button twice to confirm. If you want to cancel, press
P1 or P2 button to exit.
ADVANCED OPERATON
Monitor
This feature enables you to set squelch off and hear the calls with
weak signal. Short press the side button P1 to activate.
Emergency Calling
This feature allows you to send an emergency alert to other users on
the same channel. Other radios on the same channel will sound an
emergency alert after received emergency signal. Long press the side
button P1 to activate, press PTT button to disable it.
Scan
Scan allows you to hear conversations on all channels. When the
radio detects a transmission, it stops scanning and goes to the active
channel. This allows you to listen and talk to people in that channel
without having to channel manually. If there are transmissions on
another channel, you will not hear that activity once the radio has
stopped scanning. Short press the side button P2 to activate.
FM Radio Receiver
This radio comes with the FM radio function.
Long press side button P2 a few seconds to enter FM radio mode. To
select your favorite radio frequency to listen directly, turn the Channel
Selector Knob. Short press [SET] button to switch to FM radio Channel
mode (if you have stored FM radio stations in the programming
To Next Page
Loading...