BASIC OPERATION
Turn the Radio ON/OFF
To turn on the radio, rotate on the On/Off/Volume Knob clockwise. The
radio plays power up audio, displays current channel number or
frequency on the screen.
To turn off the radio, rotate the On/Off/Volume Knob counter-clockwise
until you hear a ‘Click’ sound.
Adjusting Volume
Turn the On/Off/Volume Knob clockwise to increase the volume, or
counterclockwise to decrease the volume.
Note: Do not hold the radio too close to the ear when the volume is
high or when adjusting the volume.
Working Mode
The radio has two working modes: VFO and Channel. Press and hold
in [SET] button and turn on the radio to switch between VFO model
and Channel mode.
Selecting a Channel
When the radio is under Channel mode, to select a channel, turn the
Channel Selector Knob until you reach the desired channel. Each
channel has its own frequency, privacy code and other settings.
Frequency Adjust
Under VFO mode, turn the Channel Selector Knob until you reach the
desired frequencies.
Receiving a Call and Talking
1. Select a channel by rotating the Channel Selector Knob until you
reach the desired channel.
To Next Page
Loading...