Confirm that the radios have the same Channel,
Frequency, Interference Eliminator Code and bandwidth
settings;
Recharge, replace and/or reposition batteries;
Obstructions and operating indoors, or in vehicles, may
interfere, change location;
Verify that the radio is not in Scan.
Heavy static or
interference
Radios are too close, they must be at least seven feet
apart;
Radios are too far apart or obstacles are interfering with
transmission.
Low battery
Recharge or replace the battery pack;
Extreme operating temperatures affect battery life.
Desktop Charger LED
light does not blink
Check that the radio/battery is properly inserted and
check the battery/charger contacts to ensure that they
are clean and charging pin is inserted correctly.
VOX feature might be set to OFF;
Use the programming software to ensure that the VOX
sensitivity level is not set to ‘0’;
Accessory not working or not compatible.
Check desktop charger is properly connected and
correspond to a compatible AC adapter;
Check the charger’s LED indicators to see if the battery
Note:
Whenever a feature in the radio seems to not correspond to the
default or preprogrammed values, check to see if the radio has been
programmed using the user program software with a customized
profile.
SPECIFICATIONS
General
Frequency Range
400-480MHz
WFM: 87.5-108MHz
To Next Page
Loading...