Promax 25 User Manual

USER’S MANUAL. PROMAX-25
09/2004 Page 15
English
4.2.1 Configuration of internal parameters (SETUP MODE)
To access the configuration menu for the internal parameters of the device,
press the direct access key to access the main menu from any operational mode. Then
select the SETUP [F1] option from the lower selection box.
Figure 5. Main menu
The configuration menu for internal functions of the device is made up of the
following page of options.
Figure 6. - Configuration of internal parameters
To modify the status of a parameter, press the navigation buttons [6] until it is
marked by the arrow. Then activate it by pressing the select button [7]. The navigation
buttons [6] can be used to modify the value from among the available options. Finally, to
validate the new status, press the select button [7] again.
The internal parameter configuration page allows the following parameters to be
set:

Promax 25 Specifications

General

Brand	Promax
Model	25
Category	Measuring Instruments
Language	English