promethean ActivPanel User Manual

6 ActivPanel User Guide
Security slot—Allows easy
attachment of a security cable.
Pen storage compartment—Store
by inserting one end of the pen into
either side of the compartment. Then
gently press other end of pen into
the compartment.
Remove by pressing in on either end
of the pen to eject opposite end
from the compartment. Grasp pen
and remove.
Stand adjustment lever/display
stand—Adjusts the tilt angle of the
unit. See Adjusting display incline.
Pen tether attachment point—
If using a pen tether, connect it
to an attachment point located
on either side of unit.
Connection panel—
•
Power connector
•
DVI/VGA (digital/analog)
switch. Be sure to set for the
video connection you will be
using. Applies to the input and
output video connections.
•
DVI-I out connector
•
DVI-I in connector
•
USB connector
Important:
Do not lift the unit by the stand; this may damage the stand mechanism. When lifting or moving the
pen display, always do so by grasping the main body casing.
Always store the interactive pen display on a stable surface or in its original packing carton when not
in use. Be sure to adjust the stand to the low tilt position before packaging. If you do not close the
stand, the notched mechanism may be damaged during transportation and storage.
  

promethean ActivPanel Specifications

General

Resolution	4K UHD (3840 x 2160)
Display Type	LED
Screen Sizes	55", 65", 75", 86"
Operating System	Android
Connectivity	HDMI, USB, Ethernet, Wi-Fi
Integrated Speakers	Yes (varies by model)
RAM	4GB or higher (varies by model)
Storage	32GB or higher (varies by model)