promethean ClassFlow Connect - Page 10

Connect
Step 2: Connecting the video and audio cables
IMPORTANT NOTE: Turn off the power to ALL devices during
installation. Only power on the ClassFlow Connect device AFTER
all other devices are turned on.
Follow the instructions that are applicable to your system:
Connecting to an HDMI display/projector
1. ConnectoneendoftheHDMIcabletothebackofyour
display/projector.
2.Connect the other end of the cable to the HDMI port on the
backofyourClassFlowConnectdevice.
Connecting to a DisplayPort display/projector
1. ConnectoneendoftheDisplayPortcabletothebackof
your display/projector.
2.Connect the other end of the cable to the DP port on the
backoftheClassFlowConnectdevice.
3.Connectoneendofastandardaudiojackcabletothe
backofyourdisplay/projector.
4. Connecttheotherendofthecabletotheheadphonejack
on the front of the ClassFlow Connect device.
Connecting to a VGA display/projector
1. ConnectoneendoftheVGAcabletothebackofdisplay/
projector.
2.Connect the other end of the VGA cable to a VGA to HDMI
or VGA to DP converter.
10 ClassFlow Connect Installation & User Guide