ProMinent Beta b BT4b - Replacing the Vptfe Diaphragm

13.2.1 Replacing the vPTFE diaphragm
The vPTFE diaphragm (full PTFE diaphragm) is replaced in the
same way as the standard diaphragm.
A fitted vPTFE diaphragm needs to be replaced
once the dosing head screws have been loosened,
as the pump will otherwise no longer be tight.
A spare parts kit contains:
n vPTFE diaphragms
n Suction valve
n Discharge valve
n Valve ball
n Sealing set
n Connector kit
n Seal
Pump type 2.0 diaphragm complete 2.0 spare parts kit PVM 2.0 spare parts kit PVN
1602 (1002) 1118690 1118461 1118460
1604 (1004) 1117351 1118462 1118454
0708 1117350 1118458 1118456
1008 1117350 1118458 1118456
0413 1117354 1118463 1118457
0713 1117354 1118463 1118457
Spare parts for the vPTFE diaphragm
Repair
50